Product Description

Two Purpose 5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab for Coal

Product Introduction of Two Purpose 5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab

 

5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab is composed with Girder frame, Crane travel device, and the trolley with lifting and moving device,Cabin and cable and electric control system. There is rails paved on the main girder for the trolley moves on the main girder.

 

There are walkway platform on both sides of the main girder, one side is prepared for assembly of driving motor and maintenance the crane move device, the other side is prepare for assembly of the trolley conductor device.

 

There are two operating methods, namely, on floor and in the driver's cabin, The cabin is divided into open-style and closed style. The cabin can be installed on the left or right according to actual conditions.The operator can enter the cabin from one side, rear or top, which depends on the different user's requirements.

 

The cabin is of full field of view, and it is suspended under the main girder, there are two joystick control desk installed in the cabin, to control the lifting up and down,trolley tranverse traveling and crane long traveling.

 

The main girder joint with the two side end carriage by welding,this design and structure is strong and robust.

 

Main features of 5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab

1, It has two lifting mechanism, one is for the hook, the other is for grab.

2, There are two mechanism for grab, one is for lifting up and down, the other is for grab open and close.

3, Heavy duty, soft start, 3-5 speeds to operate, very stable to lift and run.

4, Six direction movement. 

5, Comfortable chair is provided in the cabin,the operator can enjoy the operation of the crane. 

 

 

Safety features of 5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab

1,  Weight overload protection

2,  Emergency stop system

3,  Over current protection,Short-circuit protection

4,  Phase sequence protection

5,  Zero position protection,Voltage loss protection

6, Limit switch and stopper for crane long traveling and cross traveling. 

7, Lifting overhigh and overlow limit switch

 

 

Technical Parameters Sheet of  5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab

 

Lifting capacity	t	5/5
Span	m	13.5
Work class		A6
Lifting height	m	20
Hoisting speed	m/min	40.1
Travering of crab	m/min	44.6
Crane travelling	m/min	93.7

 

Photo of the 5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab

 

Sketch of 5/5 Ton Electric Double Girder Overhead Crane with Hook and Grab

 

 

 

FAQ

 

1. How can I get a precise crane offer?

A. To providing you a precise crane offer efficiently, please kindly provide details as following:

a). Lifting capacity, material weight(Ton)

b). Lifting height; (meter)

c). Crane span, the width of inquired crane(meter)

d). Crane traveling length; when rail track/runway beam needed, traveling length shall be provided

e). Working power; power source at site(Voltage, Phase and Hz)

 

2. Can I get your crane products with customized personalized service?

A. Yes, Henan Mine Group provide customized personalized products for our clients all the time. Just freely let us know your special demands about the products, our engineering team will work on that.

 

3. What should I do if l'm not able to install the crane after buying?

A. Feel free to contact us. Our engineering team is available for oversea service with crane installation, inspection and commissioning.

 

Payment Terms︰ L/C, T/T, Western Union

Product Image